Advertisement
Front Panel Step 2 Continued: Program the DSR-6100.
Confirm the locked signal is actually the correct/ESPN signal.
Place the cursor in the upper-left corner of any menu screen and press ENTER. The front panel display will
revert to the main "DSR-6100" menu. Use ◄ ► arrow buttons to select "Channel" and press ENTER.
Press the ► once to select "VCT" and press ENTER. The cursor will blink alternatively with ▲▼ arrows.
Use the ▲▼ arrow buttons to display the available VCTs. This ESPN system uses 639.
When 00639 appears, press ENTER.
NOTE: If 00639 never appears when performing this step, this indicates the unit may be locked [SIGNAL LED] to
the wrong satellite signal. Other satellites may contain signals with matching signal tuning parameters.
It is no longer necessary to input a virtual channel number. ("Channel" field)
The DSR-6100 will be automatically tuned to the designated network at the time of authorization.
Front Panel Step 3: Check for the latest firmware version.
Automatic upgrade via satellite is a background process that starts at signal lock.
Front panel programming can be done while updated firmware code is loading.
during boot up
1EA or higher/newer firmware version is required for ESPN Networks broadcast on Galaxy 14 Transponders 9 and 14.
Additional Details:
After making required connections, connect to AC power and allow the unit to boot up.
When a new unit first boots up after being plugged in, this appears on the front panel, for a few seconds.
This example shows firmware version "1E6". (Ignore the digits after the decimal point.)
When a unit is up and running, an "Install" menu labeled "Firmware" has the version.
From the main/DSR-6100 menu, move the cursor to "Install" and press ENTER.
Press the ▲ arrow button until the "FIRMWARE" menu appears.
The field labeled "High" is the current version.
The "Upgrade" field tells us what version (if any) is currently loading into the DSR-6100.
"High" version 1E6 can acquire the signal and receive the 1EA* firmware download.
"High" version 1EA* is required for HD service output.
*
or higher/newer
This menu will be displayed:
These are the version displays from a unit that has finished an upgrade to 1EA.
DSR-6100 menu → Install → FIRMWARE → High (read only)
5
Advertisement
