KitchenAid KSDB900ESS Owner's Manual page 25

3. Unscrew the metal cover and unscrew the blue regulator cap.
Keep the washer in place.
A. Metal cover
B. Washer
C. Blue regulator cap
4. Flip the blue regulator cap over and screw it back into the
metal cover.
A. Natural gas position
B. Propane gas position
5. Screw the metal cover securely back into place. Do not
overtighten.
To Convert Surface Burners (Natural Gas to
Propane Gas)
1. If installed, remove the burner grates.
2. Remove the burner caps.
3. Remove the burner base.
A. Igniter electrode
B. Burner cap
C. Gas tube opening
D. Burner base
A. Burner cap
B. Burner base
C. Gas tube opening
D. Choke (for use with large burner, Propane gas only)
4. Apply masking tape to the end of a 9/32" (7 mm) nut driver to
help hold the gas orifice spud in the nut driver while changing
it. Press nut driver down onto the gas orifice spud and remove
by turning it counterclockwise and lifting out. Set gas orifice
spud aside.
A. Igniter electrode
B. Orifice spud
C. Orifice spud holder
D. Screws
Large Burner
25