LG A9 Series Owner's Manual page 57

Status Display
List
Dust Emptying
(Replace Bag)
Indicator
a
Auxiliary Battery
Indicator
b
Auto Emptying
Indicator
c
NOTE
• Remove all the protective plastic from the vacuum cleaner before use. Otherwise, it may cause abnormal
noise during the dust emptying operation.
Emptying the Vacuum's Dust Bin
Using the Auto Mode
When the automatic dust emptying mode is set,
the dust emptying operation starts automatically
whenever the vacuum cleaner is properly inserted
into the product.
When you purchase the product, the automatic
dust emptying mode is set by default.
• Indicates the dust emptying operation status or when to replace the
dust bag.
- White: Product is emptying dust.
- Flashing red: If the indicator flashes red while emptying dust, replace
the dust bag at the end of the dust emptying operation.
- Flashing red, beeping: If the dust emptying operation is complete and
the dust bag is full, the indicator will flash red, beep 10 times and
then turn off.
- If the indicator flashes red, replace the dust bag to maintain product
performance.
• Indicates the charging status of the auxiliary battery.
- Flashes: When the auxiliary battery is mounted in the charger.
- Lights up briefly and then turns off: Auxiliary battery charging is
complete.
- The auxiliary battery will not charge until the battery mounted in the
vacuum cleaner is fully charged. Check the battery level on the handle
of the vacuum cleaner to check whether charging is complete.
• Lights to indicate that the automatic dust emptying mode is on.
- Automatic dust emptying mode automatically starts to operate every
time the vacuum cleaner is mounted correctly onto the product.
- If you remove the vacuum cleaner and mount it immediately, dust
emptying operation may not start automatically, depending on the
circumstance. If it doesn't start automatically, select the Start/Stop
button to start.
AUTO
Descriptions
1
Insert the vacuum cleaner into the product.
• After adjusting the length adjustment pipe
of the vacuum cleaner to the shortest
length, attach it to the product.
• If the vacuum cleaner pipe is connected to a
combination tool or a crevice tool, the
vacuum cleaner doesn't fit inside the
product. Use it without the combination
tool or the crevice tool.
• If the vacuum cleaner fits properly inside
the product, the alarm will sound. If the
alarm does not sound, reinsert the vacuum
OPERATION 17