Manual Soaking; Half-Load Detection System; Optional Functions; Washing Water Temperature Selection - Kenwood K814WM18 Installation Instructions Manual

manual soaking

To manually soak your laundry, press the Start / Pause button a few minutes after the wash
programme has started when the drum is full of water. The washing machine will suspend the
laundry to soak it in the water. After your desired soaking time, press the Start / Pause button, the
machine will continue the previous wash.

half-load detection system

Your machine features a half-load detection system. In case you load machine to approximately half
or less than the maximum laundry capacity, your machine will run so as to save washing time, water
consumption and energy in some programmes. When half load function is active, the machine can
complete the programme you have set in a shorter time.

optional functions

Depending on the programme you select, you can combine different optional functions.
• Press the button of the optional function you would like to select.
• If the indication of the function button remains lit it means that the function has been selected.
• If the indication of the function button is flashing it means you cannot use that additional function
for the wash programme you selected.
Reason for non-activation:
• The optional function you want to use in the washing programme you have selected is not
applicable.
• Your machine has passed the stage, during which the optional function you want to select would
be implemented.
• It is not compatible with an optional function you have selected previously.

washing water temperature selection

You can select the washing water temperature with the Temp
button.
You can gradually decrease the washing water temperature
between the maximum temperature of the selected programme
and cold washing by repeatedly pressing the Temp button.
If you have missed the washing water temperature you want,
continue and the temperature selection will loop back around.
Temperature Cycle
90° - 80° - 70° - 60°- 50° - 40° - 30° - and -- (cold)

spin speed

You can adjust the spin speed by pressing the Spin button. Only
a lower spin speed than the one of the selected program can be
selected.
Spin speeds selectable are:
1400 - 1200 - 1000 - 800 - 600 - 400 - or -- (no spin)
Kenwood 8kg Washing Machine K814WM18 Manual.indd 21
Select ons
Temp. Spin Delay Pre Wash Start /Pause
60°C
40°C
Select ons
Temp. Spin Delay Pre Wash Start /Pause
60°C
40°C
21
21/06/2018 08:12