Table of Contents
Advertisement
3.2 Assembly/Panel Removal
3.2.1 Stand removal
Notes: Refer to
Figure 3-9
and
1.
Remove the fixation screws [1] that secure the stand
2.
Take the stand bracket out from the set.
3.2.2 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
1.
Remove fixation screws [2] and [3] that secure the Back cover assy. Refer to
Remove fixation screws [2] and [3] that secure the Back cover assy. Refer to
At the indicated areas [4] the cover is secured by clips. Be very careful with releasing those. Refer to
2.
Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
Figure 3-10
for details. But Figures below can deviate slightly from the actual situation due to the different set executions.
Figure 3-10 (For 4022 series)
Figure 3-9
Figure 3-11
for details.
Figure 3-12
for details.
Figure 3-13
for details.
Hide quick links:
Advertisement
Table of Contents
