3.2 Assembly/Panel Removal
3.2.1 Stand removal
For (85x5 Series)
1. Remove the fixation screws [1] that secure the stand.
2. Remove the fixation screws [2] that secure the stand.
3. Take the stand bracket out from the set.
For (9xx5 Series)
1. Remove the cover that in red circuit area.
2. Remove the fixation screws [1] that secure the stand.
3. Remove the fixation screws [2] in the clock rear cover to release the connector from SSB
4. Take the stand bracket out from the set.
1
1
1
1
(85x5 Series stand removal-1)
2
(85x5 Series stand removal-2)