Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU.
1. Gently unplug all connectors from the PSU.
2. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
3.2.7 Speakers
For (85x5 Series)
1. Gently release the tapes that secure the speaker cables.
2. Unplug the speaker connector from the SSB.
3. Take the speakers out.
For (9xx5 Series)
5. Remove the fixation screws [2] that secure the speaker.
6. Release the connector in red area from the speaker
7. Take the whole of speaker out from the set as below indicated.