Table of Contents
Advertisement
8
About PC test software DIFS16P
The DIFS16P PC (Diagnosis Inventory Feedback in Service 16 bit) diagnostic tool is a
SW-independent tool to check the PC hardware.
It is self booting from CD, and has its own operating system.
A "Burn-In Test" is possible.
Predefined test scripts are defined for a "Quick Test".
Test results are not intended to be stored on PC or other removable devices.
DIFS16P can be controlled by mouse or keyboard.
To navigate with the keyboard, use the arrow keys or the highlighted hotkeys which are
activated by the "Alt"-Key (in DIAGNOSIS Configure, for example: to set the level of a test
to level 2 use the combination Alt+2).
To switch between the navigation and the worktop use the left and right arrow keys.
Levels
The Test and Diagnosis Tool DIFS16P has 4 major characteristics.
Integrated diagnosis modules
System board
Analyzes runtime, post or other error logs via BIOS
R630/R640; M440/M450
NOTE
The goal of the tests featured by this tool is to decide
whether to:
•
Change single HW components
•
Change the complete HW
•
Reload SW on the existing HW
It provides information about the hardware inventory and it offers testing and
diagnosis functionality in different degrees of inspection.
It offers a short, general test suite named "Level 1" to help you find out which
component is defective, checking basic functionality.
This level has a maximum duration of 5 minutes (hardware dependent).
It offers another test suite named "Level 2," whose purpose is to test at a higher
degree of inspection.
This level is quality oriented and therefore takes more time.
You can also choose "Level 3" in the "Configured Diagnosis," which tests at the
deepest level.
To run a test several times, you can specify "Cycles" in the "Configured Diagno-
sis" menu.
TD00-400.840.10.03.02
02.08
General information
Page 8 of 32
CS SD SP/CO
1.3
0
0
Siemens
Medical Solutions
Advertisement
Table of Contents
