Table of Contents
Advertisement
5. Operation (Cont.)
If the unit is not heating effectively with a Low fan speed
fan speed to High
Depending on the type of indoor unit being used, it may indicate a function
that it does not have. (The fan speed is constant.)
If you cannot turn the air conditioner off in the normal way
Disconnect the power to the indoor unit and contact the distributor where the
product was purchased.
<Auto operation>
Only when identical refrigerant system inside all the indoor units or HEAT
RECOVERY (3WAY) type are under control as one group. It heats or cools
automatically via the differences between the set temperature and the room
temperature.
<Dry operation>
• Depending on the indoor unit used, the remote controller may have a [Dry]
indicator on its display even though the unit does not have the Dry
function. (Same as cooler operation)
• When the room temperature approaches the temperature setting, the unit
continues to start up or stop automatically.
• When the dry mode stops operating, the indoor unit's fan blows a gentle
breeze in order to keep the moisture from returning to the room at a
minimum.
• Depending on the indoor unit used, and/or the temperature in the room, the
fan speed may not be adjustable.
• Depending on the indoor unit used, when the outside air temperature is 59 °F
(15 °C) or less, the dry function will not operate.
11
(EN)
or Medium
.
, switch the
Advertisement
Table of Contents
