en Installation and connection
4.4 Removing the transit
bolts
The appliance is secured for trans-
portation using transit bolts on the
rear of the appliance.
Note: Keep the transit bolt screws
and the sleeves in a safe place for fu-
ture transport.
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
screws for the transit bolts with a
WAF 13 wrench.
14
Pull the power cable out of the
3.
holder.
Remove the 4 sleeves.
4.
all 4
Put on the 4 cover caps.
5.