Important Information
Do not drop the body or power base to avoid damaging it.
●
Do not move the body or power base by dragging.
●
(It may scratch the table or work surface.)
Do not turn the power switch on without water.
●
(It may cause malfunction.)
Do not use the appliance outdoors.
●
Make sure the appliance is properly located on the stand before
●
switching on.
Beware of steam when the appliance is refill with water
●
immediately after boiled.
Do not move the appliance by holding the lid.
●
Make sure to clean the appliance after every use.
●
This symbol on the products indicates "hot surface and should
not be touched without caution".
EN8
Parts Names and Handling Instructions
Spout
Body
Body connector
Power base (Stand)
Before use
Clean the appliance by following the steps below for the first time or when you have
●
not used it for a while.
① Fill water up to the maximum water level and boil. (P. EN10)
② Pour the water out from the spout. (P. EN11 After use, pour out any remaining water.)
Do not use a socket or extension cord.
●
Lid
Lid release button
Handle
Power switch
Power indicator
Power base connector
Power cord
Power plug
EN9