Tilt Support Lever For Power Trim And Tilt Model; Top Cowling Lock Lever (Pull Up Type) - Yamaha F250B Owner's Manual

Components
ECM00840
NOTICE
The trim tab also serves as an anode to
protect the engine from electrochemical
corrosion. Never paint the trim tab as it will
become ineffective as an anode.
1. Trim tab
2. Bolt
3. Cap
Bolt tightening torque:
42.0 Nm (4.28 kgf-m, 31.0 ft-lb)
38
EMU26341
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up po-
sition, lock the tilt support lever to the clamp
bracket.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the tilt
position.
EMU31420

Top cowling lock lever (pull up type)

To remove the top cowling, pull up the lock le-
ver(s) and lift off the cowling. To install the top
cowling, place it in its original position, and
then move the lever(s) downward to lock it in
place.