Table of Contents
Advertisement
Important Items
M aintenance
Cleaning the head section
Cotton sw ab
Capstan
Head
Pinch roller
Tape guides
M aintenance of the unit
When the front panel or case becomes dirty, w ipe w ith a
soft, dry cloth. Do not use thinner, benzine, alcohol, etc.
for these agents may cause discoloration.
Reference
Caution on condensation
Condensation (of dew ) may occur inside the unit w hen
there is a great difference in temperature betw een this
unit and the outside.
This unit may not function properly if condensation oc-
curs. In this case, leave the unit for a few hours and re-
start the operation after the condensation has dried up.
Be specially cautious against condensation in a follow ing
circumstances:
When this unit is carried from one place to another across
a large difference in temperature, w hen the humidity in
the room w here this unit is installed increases, etc.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
follow ing operations.
1 Remove the CD from the unit.
2 Press the CD 6 key.
3 Wait for some time and verify that the dis-
play appears as above.
4 Wait a few seconds and turn the unit OFF.
Cleaning the heads and periph-
eral components
For maintaining the best condition of
the deck and for longer service life, al-
w ays keep the heads, capstan and
pinch roller clean. To clean them, per-
form the follow ing:
1. Open the cassette holder.
2. Using a cotton sw ab dipped in alco-
hol, clean the head, capstan and
pinch roller carefully.
In regard to contact cleaner
Do not use cont act cleaners because it could cause
a m alf unct ion. Be specially caref ul not t o use con-
t act cleaners cont aining oil, f or t hey m ay def orm t he
plast ic com ponent .
M emory backup function
Stored contents w hich are cleared immediately w hen
pow er plug is unplugged from pow er outlet :
Stored contents w hich w ill back-up after pow er plug is
unplugged from pow er outlet:
Demagnetizing the head
When the recording / playback head is
magnetized, the sound quality w ill dete-
riorate. In such a case, demagnetize the
head using a commercially available de-
magnetizer (head eraser).
¶ There are precisely aligned parts
around the heads, including the
tape guides. When cleaning, pay
special attention so as not to apply
shock to them.
Clock display
Preset station, Program Timer
Important Items
43
EN
Advertisement
Table of Contents
