Loading Paper - Epson Stylus Photo RX600 Product Information

Epson Stylus Photo RX600
Interface
Standard Based on Universal Serial Bus
Specifications Revision 2.0, Universal
Serial Bus Device Class Definition for
Printing Devices version 1.1; Universal
Serial Bus Mass Storage class Bulk-only
Transport Revision 1.0
Bit rate 480 Mbps (high speed device)
Data encoding NRZI
Connector USB Series B
Recommended
cable length 6.6 feet (2 meters) or less
Safety Approvals
Safety standards UL 60950, CSA C22.2 No. 60950
EMC FCC part 15 subpart B class B
CSA C108.8 class B
Supported Memory Cards
Top slot SmartMedia (maximum 128MB;
standard 2000 compliant)
xD-Picture Card
xD
Middle slot (left) Memory Stick
Memory Stick PRO
MagicGate Memory Stick
SD (Secure Digital) Card
MMC (MultiMediaCard)
Memory Stick Duo (adapter required)
miniSD Card (adapter required)
SD or MMC
Bottom slot CompactFlash Type I and Type II
IBM Microdrive
CompactFlash or Microdrive
Epson Stylus Photo RX600
4 -
SmartMedia
MemoryStick
Memory Card Image File Requirements
File format
Media format
Image size
Number of files
* The DCF standard is set by the Japan Electronics and Information Technology
Industries Association (JEITA).
Note:
You can't print images whose file names contain double-byte
characters, as is the case with some Asian language fonts. Do not
use Asian language fonts to name your files if you will be printing
from the memory card.

Loading Paper

Single Sheets
1. Open the output tray.
2. Flip the feeder guard forward.
Feeder guard
3. Press the sides of the left edge guide together and slide it all
the way to the left.
2/04
JPEG or TIF format image files,
DOS FAT taken with a DCF
version 1.0 compliant digital camera
(supports Exif Print v. 2.1 and 2.2)
DCF (Design rule for Camera File
system) version 1.0 compliant*
Vertical: 120 to 4600 pixels
Horizontal: 120 to 4600 pixels
Up to 999
Output tray