Selecting The Correct Media Type; Placing The Original Document; Copying Without A Computer - Epson Stylus Photo RX600 Product Information

Epson Stylus Photo RX600

Selecting the Correct Media Type

Select the paper Type (Windows) or Media Type (Macintosh)
setting according to these guidelines:
For this paper
Plain paper sheets or envelopes
Epson Iron-on Transfer paper
Epson Premium Bright White Paper
Epson Photo Quality Ink Jet Paper
Epson Photo Quality Ink Jet Cards
Epson Photo Quality Self Adhesive
Sheets
Epson Matte Paper Heavyweight
Epson Double-Sided Matte Paper
PremierArt Matte Scrapbook Photo
Paper for Epson
Epson Photo Paper
Epson Glossy Photo Paper
Epson All-Purpose Glossy Photo Paper
Epson Glossy Photo Greeting Cards
Epson Premium Glossy Photo Paper
Epson Photo Stickers
Epson Premium Luster Photo Paper
Epson Premium Semigloss Photo Paper
Epson ColorLife Photo Paper
Epson Semigloss Scrapbook Photo
Paper
Epson Ink Jet Transparencies

Placing the Original Document

Follow these steps to position a photo or document to scan or
copy:
1. Open the scanner lid.
2. Place your photo or document face-down on the glass in the
upper left corner about 1/10 inch from the edges, as shown.
0.1 in
Move the photo or
document in about 1/10
inch from the edges
Epson Stylus Photo RX600
6 -
Select this Type or
Media Type setting
Plain paper
Bright White Paper
Photo Quality Ink Jet Paper
Matte Paper - Heavyweight
Photo Paper
Glossy Photo Paper
Premium Glossy Photo
Paper
Premium Luster Photo
Paper
Premium Semigloss Photo
Paper
ColorLife Photo Paper
Ink Jet Transparencies
0.1 in
3. Close the scanner lid.
Note:
If you place your photo or document against the edge of the
glass, the edges of your photo or document may not be copied.
To scan or copy a thick document, you can
remove the scanner lid. Turn off the RX600,
and open the scanner lid completely. Then
disconnect the cord from the TPU connector
and pull the lid straight up. Turn on the RX600
and gently press down the original to keep it
flat on the scanner glass as you scan. When
you're finished, be sure to turn off the RX600
before replacing the scanner lid and plugging
in the connector.

Copying Without a Computer

Follow the steps below to copy a photo or document using
just the RX600. (To copy using Epson Smart Panel, see the
User's Guide.)
1. Make sure the RX600 is on, paper is loaded, and the output
tray is open.
2. Place your document face-down on the glass, as described
on page 6.
3. Close the scanner lid.
4. Press the button to set the RX600 to Copy mode.
Copy
5. Make sure you see
screen. This prints a photo or document with borders. If
you want to select a different setting, such as a photo with
no borders, press the
Copy Layout" below.
6. Use the u and d buttons to choose the copy options listed
below. Use the l and r buttons to change settings.
: Choose the number of copies you want to
Copies
make (1 to 99).
Reduce/Enlarge
Setting
Actual
Auto Fit Page
Letter 4 × 6
4 × 6 Letter
Letter 5 × 7
5 × 7 Letter
4 × 6 8 × 10
8 × 10 5 × 7
2/04
at the top of the LCD
Standard Copy
button, then see "Changing the
Menu
: Choose from these options:
Result
Prints the image at its original size. Do
not select this when you want
BorderFree copying.
Reduces or enlarges the image, as
needed, to fit the selected paper size.
Always select this for BorderFree
copying.
Converts the original document size (to
the left of the arrow) to the finished
copy size (to the right of the arrow). Do
not select this when you want
BorderFree copying.