Table of Contents
Advertisement
PCI Express Driver for Macintosh
This driver is for the P2 card on this unit.
By installing this driver, it is possible to connect
to this unit to the Macintosh using PCI Express to
transfer data at a higher rate.
The latest driver information can be viewed at the
following website.
http://pro-av.panasonic.net/
Installation of the PCI Express driver
For the driver installation procedure, refer to
"2. Installation of the P2 Software" in the
installation manual in the Manuals folder on the
CD-ROM.
<Note>
Reinsert the P2 card if the P2 card icon is not
displayed.
<Reference>
Occasionally, a message regarding "Device
Removal" may be displayed when the P2 drive is
connected and the Macintosh is turned on.
The same message may also be displayed when
reinserting the P2 card because the P2 card icon
is not displayed, but this is not a malfunction.
Click "OK" and proceed to use the card.
17
Advertisement
Table of Contents
