Table of Contents
Advertisement
Parts and their Functions
Power Switch Box (AJ-PCD35EJ only)
（2）
During external use of the P2 drive, connect the
power switch box between the drive and the AC
adapter.
When the power switch box is connected, you
can use the switch to turn off the P2 drive instead
of unplugging the power cord.
(1)DC IN Socket
Connect the AC adapter to this socket.
<Note>
Do not connect anything other than the
supplied AC adapter.
(2)DC OUT connector
Connect this to the DC IN 16V socket on the
P2 drive.
(3)Switch
Turn ON the switch when using the P2 drive.
Turn OFF the switch when the P2 drive is not
in use.
When the P2 drive is connected to a personal
computer, do not turn OFF the switch while
the computer is turned ON. Always turn OFF
the computer before turning OFF the switch.
When turning ON the computer, be sure to
turn ON the switch and supply power to the
P2 drive before turning ON the computer.
<Note>
Turning OFF the switch during data transfer may
result in loss of data.
(continue)
（3）
（1）
9
Advertisement
Table of Contents
