Sony VPL-FE100U Series Quick Start Reference Sheet page 3

SmartPanel Projector Driver Application Note
Menu summons onscreen menus. Adjust keys move through menus and adjust zoom, lens orientation,
and focus when used with Lens Focus, Lens Zoom, and Lens Shift. Enter accepts changes. Pic Mute is a
toggling video mute.
APA is only available for Computer Inputs.
The hidden functions available for the Sony with this Driver are as follows:
MENU
ENTER
ADJUST LEFT
ADJUST RIGHT
ADJUST UP
ADJUST DOWN
D. Relays
The following table specifies the factory preset
settings for the low-current relays found on the rear
of the SmartPanel. The Configuration Utility can
be used to customize these settings your installation.
Relay 1 ON Maintained
Relay 2 ON Momentary
Relay 3 OFF Momentary
Selection Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method
Control Wiring Option
Power status verification via RS-232 Power Polling is not available for this projector model.
Control for the Sony with this Driver is entirely via RS-232. However, we recommend wiring for Infrared in
case the projector is ever upgraded or a later revision Driver adds functionality accessible only through IR.
The following table specifies settings for the Panel's configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the SmartPanel Configuration and Installation Guide.
Lockout Timer
Inactivity Shutdown
© 2001 SP Controls Inc. 601 Minnesota Suite 115 San Francisco, CA 94107
APA
LENS ZOOM
LENS SHIFT
LENS FOCUS
DIGITAL ZOOM +
DIGITAL ZOOM –
Power Current Sensor (see note 1)
None (see note 2)
46 seconds (see note 3)
Disabled
Sony VPL-FE100U
PIC MUTE
RELAYS
PWR PWR PWR
ON ON OFF
MAINT. MOM. MOM.
help@spcontrols.com
500mA MAX. CURRENT
SELECTION
(EXT. SWITCHER CTRL)
4 3 2 1