Installing and Setting Up the Server Software
Choose
•
Roll fed media
paper source you are using
Choose
•
Borderless printing
Choose
•
Bidirectional Printing
this off for best quality)
Choose
•
Cut media
method to cut roll paper
Enter a value in the
•
need to adjust the setting for precise paper feeding
7. Click
.
OK
8. From the Environment menu, click
9. Open the
or
Color
for your paper type and resolution.
10. Click
, then click
Open
11. Click
Start Spooler
or
Sheet fed media
to allow edge-to-edge printing
to print in both directions (turn
to allow the printer to use the printer's cut
Micro media feed adjustment
Load
folder, then choose the environment file
Grayscale
.
Yes
to start the RIP.
19
, depending on the
box if you
.
|
19