The Control Panel - Kenwood K814WM14 Installation Instructions Manual

the control panel

Programme Dial
Different wash programmes can
be selected according to your
wash requirements.
To set your Favourite wash
programme, turn the dial to
the desired wash programme,
adjust the spin speed and
temperature, then press and
hold Spin Speed Button until a
beep is heard.
Power Button
Press to turn on/
off the machine.
• If you need to change a setting after the wash has started, switch the machine off. Switch
on the machine. Re-select the programme, spin speed and optional functions, and then
press the Start / Pause button. (Ensure the Child Lock is off, otherwise the original
programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the washing
machine. This is not an indication of a malfunction.
During initial start-up and use of the unit, there may be a slight smell
while the motor is settling in. This is not a fault; this is normal operation.
14
LED Display
• The delay light will be on to indicate the delay time. It will start the
programme after the selected hours.
• After the wash procedure begins, the display will show the wash
remaining time.
• When the child lock function is selected, the Child Lock icon will be
illuminated.
• When the door is at the lock state, the Door Lock icon will be illuminated.
Favourite
Rinse & Spin
Delay Button
This button is used
to delay the wash.
Press continuously
to select the time
you want to start
the wash.
Press for 3 sec. to set Favourite
Spin Speed Temperature
Button Button
Press to select the Press to select the
desired spin speed desired temperature
of the selected wash of the selected wash
programme. programme. (If no
temperature indicator
Press and hold to set
is lit, the water
as favourite one of the
temperature is cold.)
wash programmes.
Start/Pause
Button
Press to start your
wash. Press while
in operation to
pause your wash.