The Control Panel - Kenwood K1016WM17 Installation And Instruction Manual

the control panel
Programme Dial
Different wash programmes can
be selected according to your
wash requirements.
To set your Favourite wash
programme, turn the dial to
the desired wash programme,
adjust the temperature, spin
speed and other function
options, then press and hold
Speed Wash button until a beep
is heard.
LED Display
• The delay icon will be on to indicate the delay time.
After the wash procedure begins, the display will show the wash
remaining time, spin speed and other function options.
• When the child lock function is selected, the Child Lock icon will be
illuminated.
• When the door is at the lock state, the Door Lock icon will be illuminated.
Speed Wash
FavourlteQ
Cotton
1
Cotton Eco<::]
Synthetic
HandWash
Dela
y
WashO
Baby Care
SportWear ~ ~• L 1
leans
Expres
an © © ®
On/OH
i
o
8 CA +3
Delicate
Temp.
Extra Rinse.
Mix
Colours Wool
n
& 400 800 1200 1400 1600
W
Only Rinse &Spin
Spin PreWash
Drain
_ SStart/Pausee
Spin Only
Button
Delay
Function
This button is used to delay the wash. Press continuously to select the time you
want to start the wash.
Temp
Press continuously to select the desired temperature of the selected wash
programme.
Spin
Press continuously to select the desired spin speed of the selected wash
programme. (If no spin speed is showing on the display, it means that spin
speed is 0.)
Speed Wash Press this button to wash faster and complete in a shorter time.
Extra Rinse
Press this button to get an extra rinse.
Pre Wash
Press this button to get an extra wash before main wash.
On/Off Press to turn on/off the machine.
Start/Pause Press to start your wash. Press while in operation to pause your wash.
• If you need to change a setting after the wash has started, switch the machine off. Switch
on the machine. Re-select the programme, spin speed and optional functions, and
then press the Start/Pause button. (Ensure the Child Lock is off, otherwise the original
programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the washing
machine. This is not an indication of a malfunction.
O
During initial start-up and use of the unit, there may be a slight smell
while the motor is settling in. This is not a fault; this is normal operation.
13