Panasonic MDF-137 Series Operating Instructions Manual page 10

FREEZER COMPONENTS
1. Door: To open the door, grip the handle.
2. Handle: Always grip this handle to open and close the door.
3. Lock: Turn counterclockwise to 180
4. Access port: This is used for leading the measuring cable from the chamber to the outside.
5. Drain port: The water accumulated on the bottom of the chamber can be drained through this port.
6. Caster: 4 casters are provided to facilitate moving of the cabinet. At the time of installation, make
sure that the front 2 casters are not contact with the floor, by adjusting the leveling feet.
7. Leveling foot: 2 leveling feet are provided on the front side (right and left). Keep the unit in level by
adjusting these feet at the installation.
8. Space for temperature recorder: A temperature recorder (optional component) can be attached
here. See page 27 "Temperature recorder (OPTION)".
9. Control panel: To display the temperature setting and running condition. See page 10 for the
details.
10. Door gasket: This provides a tight door seal and prevents cold air leak. Keep clean.
11. Basket: Used for storing the materials in the chamber.
12. Remote alarm terminal (on back side): This is used to notice an alarm condition of the unit to
remote location. Refer to page 13 "Remote alarm terminal".
13. Battery switch: This is a switch for power failure alarm. Always set the switch in ON position. Be
sure to turn off this switch to save the battery if the freezer is not in operating for the long period (more
than 1 month).
14. Power switch: This is for turning ON/OFF the power to the unit. ON – "I" OFF – "○". This has
a function as an over-current protection breaker (15 A).
15. Inner lid: Serves as a means of reducing cold air leakage when the door is open. Remove the frost
regularly. (MDF-437 only)
o
with a key and the door is securely locked.
9