Lqc1 - LG GD1329CGW Owner's Manual

36
PROGRAMMING MODE
1.
Pressing the Start button cycles to the next test function.
Number of times
the Start
button is pressed
None
■ COIN/CARD TYPE
1 time
■ OPL TYPE
2 time PDA CHECK
3 time Motor runs.
■ ELECTRIC TYPE: Heater runs.
4 time
■ GAS TYPE: GAS valve runs.
■ ELECTRIC TYPE: Heater runs.
5 time
■ GAS TYPE: GAS valve runs.
LED & KEY CHECK
Press High Temp. button.
6 time Press Med Temp. button.
Press Low Temp. button.
Press No Heat button.
7 time Test ends.
Door switch
During check, if the
(Motor & Heater Off, Buzzer beeps
door is open.
seven times)
During check, if the Test goes back at step 2.
door is closed (Motor on & Heater Off )
NOTE
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use .
Checking point
- ELECTRIC TYPE : US:OE
- GAS TYPE : US:Og
- ELECTRIC TYPE : CA:PE
- GAS TYPE : CA:Pg
Motor + Heater 1 (2700W)
Motor + Valve
Motor + Heater 1 +Heater 2 (5400W)
Motor+Valve
Display
LqC 1
Version and code of machine (All LED on) CARD/COIN
machine - Display US:OE or US:Og and gU:XX
alternately. OPL machine – Display CA:PE or CA:Pg and
gU:XX alternately. XX is the version number
Ir--
Measured moisture value (70~239)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
Version and code of machine

LqC1

dE
(The door is open. Please close the door completely)
Measured moisture value (70~239)