Removing The Metal Sheet From An Rru Installed In Centralized Mode; Loosening Captive Screws On The Attachment Plate - Huawei RRU Hardware Maintenance Manual

RRU
Hardware Maintenance Guide
Figure 4-10 Removing the metal sheet from an RRU installed in centralized mode
If an RRU is installed in centralized mode, the RRU can be removed without removing the two RRUs on
its right and left sides. The procedure is the same as that for removing a single RRU.
Step 6 Use an inner hexagon torque screwdriver to loosen captive screws on the attachment plate for
the RRU and on the top holes of the main bracket, as shown in
bottom of the RRU to remove it, as shown in
Figure 4-11 Loosening captive screws on the attachment plate
Issue 16 (2015-03-23) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 4-12.
4 Replacing an RRU
4-11. Then raise the
22