Replace The Rru In The Middle; Reusing The Conversion Bracket - Huawei RRU Hardware Maintenance Manual

RRU
Hardware Maintenance Guide

1.
2.
Issue 16 (2015-03-23)

Replace the RRU in the middle.

− (Recommended) Method 1: Reuse the conversion bracket.
Remove conversion brackets of the faulty RRU and blade RRU and install the
conversion bracket of the faulty RRU on the side of the blade RRU, as shown in
4-19.
Figure 4-19 Reusing the conversion bracket
Install the blade RRU on the general main bracket, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Replacing an RRU
Figure
Figure 4-20.
29