Sony Betacam SX DNV-5 Maintenance Manual page 45

LCD Display (factory setting)
DIAG 6-1
VTR MODE SEL-1
61 0000
1 2 3 4
DIAG 6-2
VTR MODE SEL-2
62 0000
1 2 3 4
DNV-5
DNW-7/90/90WS
http://getMANUAL.com
Description
1. V/AU OUT : Sets the video and audio output.
0 : Outputs the PB/EE signal.
1 : Outputs the EE signal.
2. AU OUT (F/R) : Sets the audio output during FF/REW.
(Valid when V/AU OUT is set to 0.)
0 : Outputs the EE signal.
1 : Outputs no signal.
3. AU OUT CH : Sets the audio output channel.
0 : CH1/2
1 : CH3/4
4. AU REC CH3/4 : Selects the source during recording in CH3/4.
(Valid when no camera adapter (CA-701) is connected or when AU ADAPTER
ENABLE is disabled.)
0 : CH3/4
1 : Records the same signal as in CH1/2.
2 : Not use CH3/4.
1. AU REC EMPH : Sets the audio emphasis (during recording) to ON or OFF.
0 : OFF
1 : ON
2. AU SG (1 kHz) : Sets whether to generate a 1 kHz test signal when a color-bar signal is
generated from the internal signal generator.
0 : Not generates.
1 : Generates when the CH1 AUDIO SELECT switch on the inside panel is set to
AUTO.
2 : Generates.
3. AU SG LEVEL : Sets the level of a 1 kHz test signal.
0 : _20 dBu (600 Z)
1 : _18 dBu (600 Z)
2 : _16 dBu (600 Z)
4. AU ADAPTER : Sets whether to connect the camera adapter (CA-701).
0 : Connects.
1 : Not connect.
2-2. DIAG Memu
2-31