Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
84 is an easy-to-use projector that weighs less than 7 pounds. From classrooms to boardrooms, your full-color presentations and videos will be bright and vibrant even in ordinary indoor lighting. You can connect the projector to a wide range of computers and video sources. Easy setup, control, and security: 8.5-second startup time and Instant Off...
See page 90 ? Help for details. epson.com/support Download FAQs and e-mail your questions to Epson support. PrivateLine support If you still need help after checking this User’s Guide and the sources listed above, you can use the Epson PrivateLine service to get help fast.
United States or Canada, usually via overnight delivery. See the brochure included with your projector for details. To register, simply fill out the registration card and mail it to Epson. Or you can register online using your projector CD or at http://www.epson.com/webreg.
VGA computer cable USB cable Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use the carrying case.
Projector Parts Front Lamp cover Control panel Remote receiver A/V mute Foot release slide lever lever A/V mute slide USB Type B Back port Computer1 and 2 ports and port audio jacks Remote receiver Rear adjustable foot Microphone jack Speaker...
To receive a component video signal from a DVD player or other video device, you’ll need an component-to-VGA video cable. You can purchase one from Epson; see the list on page 13. To play sound through your projector you will need an audio cable.
Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Replacement lamp Air filter replacement set (2 filters) Image presentation camera (ELPDC05) DC-10s document camera DC-06 document camera Wheeled soft case Soft shoulder case for projector and laptop ATA molded hardshell case ®...
Follow the guidelines in this chapter for: Positioning the projector ■ ■ Turning the projector on and off ■ Selecting the image source Troubleshooting display problems ■ Adjusting the image...
105 for details. close enough to the equipment to be able to control it. Try to leave as much space as possible between the projector and the screen to get a good-size image. Use the figure below to help you determine placement. Image size increases with distance, but can vary depending on how you position the zoom ring and whether you’ve adjusted the image with other...
Projector If you place the projector below screen level, you’ll have to tilt it up by extending the front adjustable foot. This causes the image to become “keystone” shaped, but you can correct the distortion by pressing the buttons on the projector.
To enable sleep mode, see page 75. 2. Plug one end of the power cable into the projector, and the other Displaying and Adjusting the Image end into an electrical outlet. The P power light turns orange.
3. Press the Ppower button on the remote control or on top of the projector. The projector beeps once and the Ppower light flashes green as the projector warms up, then an image begins to appear. When the Ppower light stops flashing and remains green, the projector is ready for use.
Ppower button as described below, unplug it, or turn off note a power switch that supplies power to the projector. You don’t have to Lamp life results will vary wait for the projector to cool off first.
Source between devices connected to the ports identified on each button. (The button does not work with the PowerLite 84.) Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following:...
■ ■ If you’re using Mac OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Make sure your projector is connected and follow these steps: 1. From the Apple 2.
4. Click the Arrangement Make sure Mirror Displays is checked 5. Make sure the Mirror Displays Adjusting the Image Once you see your image, you need to make certain adjustments: If the image is too high or too low, you can reposition it. See ■...
If the image is too low on the screen, you can use the front adjustable foot to raise it. 1. Stand behind the projector. Press the foot release lever up and lift 2. Once the image is positioned where you want it, release the lever 3.
Even if the projector is slightly tilted (within a range of 30° up or down), the projector has an automatic keystone correction function that detects and corrects vertical keystone distortion.
Page 26
■ Displaying and Adjusting the Image Press one of the two keystone correction buttons on the projector’s control panel, as shown below. Continue pressing the button until you are satisfied with the shape of the image. Or press the button on the remote control or projector,...
This automatically resets the projector’s tracking, sync, resolution, and position settings. If the button doesn’t correct the problem, you may need to Auto adjust the tracking or sync using the projector’s Signal menu. See page 66 for more information. note button on Enter...
All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 20 feet away. You can use the remote control to adjust the picture and sound (page 31) or to adjust the color mode for various environments (page 35).
4. Close the cover, pressing it down time. Using the Remote Control Point the remote control at the front of the projector or at the screen. Stand within 20 feet of the projector. Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly.
Switching Between Picture Sources If your projector is connected to more than one computer and/or video source, you can switch between the different sources: The easiest way to select your source is to press the ■...
Turning Off the Picture and Sound You can use the the image and sound. This does the same thing as the A/V Mute slide (shown on page 18) and is useful if you want to temporarily redirect your audience’s attention. ■...
5. When done, press the original size. Controlling the Volume To change the volume, press the control or projector. You can also adjust the volume using the projector’s menu system. See page 68. buttons E-Zoom button to enlarge the selected...
4:3 aspect ratio, select 4:3 setting 16:9 setting Note that the projector’s native aspect ratio is narrower than 16:9. Therefore, widescreen movies and HDTV broadcasts will display with black bars at the top and bottom when...
This displays the image at the largest possible size without stretching Depending on your computer display, you may see black bars at the edges. In that case, try selecting the same as the projector’s, changing the Adjusting the Color Mode You can use the...
Operating Your Computer with the Remote Control If you connect a computer to the projector with a USB cable, as described on page 42, you can use the remote control in place of your computer’s mouse. This gives you more flexibility when delivering slideshow-style presentations, since you won’t have to stand next to...
Highlighting Your Presentation You can display a pointer to call out important information on the screen. If you want to customize the pointer tool, you can choose from three alternative shapes. Using the Pointer Tool 1. To activate the pointer tool, press the remote control.
Connecting to Computers and Other Equipment his chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR, DVD player, or video camera. You can also connect the projector to a microphone, or external speakers.
Connecting to a Computer You can connect the projector to any computer that has a standard note VGA output (monitor) port, including desktop models, PC notebook Don’t try to force a computers, MacBook connector to fit a port with a hand-held devices.
3. When you’ve finished making any connections, see page 18 for instructions on turning on the projector and adjusting the image. Once the projector is turned on, select the image source: press the button on the remote control or the Search button on the projector’s control panel.
Connecting to Computers and Other Equipment your notebook or desktop computer. Messages appear as the projector is recognized and the software installation begins. Epson USB Display software. If you see a “Digital Signature Warning,” select . You will only need to install the Continue software the first time you connect.
This lets you view images on your computer monitor while the projector is in standby mode (plugged in but not turned on). You can also check your presentation or switch between picture sources even if you’ve pressed the...
Computer1 port. Connecting to Video Equipment You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its RCA connector available video output connections: (composite video) ■...
2. Connect the cable to the yellow video output connector on your player and the yellow Video 3. If you want to play sound through the projector, see page 49 for instructions on connecting audio cables. 4. If you don’t need to make any other connections, see page 17 for instructions on turning on the projector and adjusting the image.
3. If you want to play sound through the projector, see page 49 for 4. If you don’t need to make any other connections, see page 17 for Connecting to Computers and Other Equipment equipment or you can purchase one from Epson; see page 13). connector on the projector: S-Video instructions on connecting audio cables.
You will need a component-to-VGA cable, or a component video cable and adapter, for this connection. You can order the component-to-VGA cable (ELPKC19) from Epson; see page 13 for more information. 1. Connect the VGA-end of the cable to the blue connector on the projector.
Auto or RGB Video (see page 67). 3. If you want to play sound through the projector, see page 49 for 4. If you don’t need to make any other connections, see page 17 for Connecting to Computers and Other Equipment port on the projector.
Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. You can also connect a microphone and output the sound through the projector. You can use the Volume remote control to adjust the volume.
Audio1 or Audio2 jack. 2. Connect the red and white plugs on the other end to the Connecting a Microphone You can connect a dynamic microphone to the projector’s using a 3.5 mm mini-jack cable as shown below. Use the volume.
Connecting External Speakers You can output sound from the projector to external speakers with a built-in amplifier. 1. Locate the appropriate cable to connect your speakers. Depending on your speakers, you may be able to use a standard audio cable with a stereo mini-jack connector on one end and pin jacks on the other end.
Page 52
Connecting to Computers and Other Equipment...
Using the Projector on a Network f you connect your projector to a network, you can monitor it through the network. You can use EMP Monitor (available for Windows only) to monitor and control your projector through the network. For information on installing and using EMP Monitor, see the EMP Monitor Operation Guide.
1. Connect the projector to your network using a commercially 2. Connect the other end to your Ethernet hub or router. 3. Point the remote control at the projector and press the Ppower Using the Projector on a Network available 100BaseTX or 10BaseT network cable. Connect the cable to the port on the projector as shown.
Page 55
If your network does not assign addresses automatically, turn ■ and enter the projector’s DHCP , and Mask Gateway Address Enter and press Enter Enter . You see a screen like the Enter IP Address Subnet , as needed. Using the Projector on a Network...
9. To prevent the IP address from appearing on the standby screen, 10. When you’re done making all necessary changes, select Press Configuring Basic Settings You can give your projector a unique name, enable a projector keyword, or create a password for controlling the projector over the Web. 1. Press the 2.
Page 57
4. Make sure the projector has a unique name, so you can identify it on your network. If you need to rename it, highlight the then press Enter 5. Use the buttons on the remote control to select individual letters; then press to input a character.
Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. 1. Press the 2. Choose 3. Choose 4. Highlight 5. Enter the IP address for the SMTP server for the projector.
The e-mail includes the following information: Line 1: The name of the projector where the problem has ■ occurred Line 2: The IP address of the projector where the problem has ■ occurred ■ Line 3: Details of the problem...
You can use a standard web browser to monitor and control the projector through the network. 1. Make sure that the projector is set up for your network, as 2. Open your web browser and enter the IP address of the projector 3.
Fine-Tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system Adjusting the image ■ Adjusting signal settings ■ ■ Customizing projector features Using the projector security features ■...
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the 2. Use the Fine-Tuning the Projector remote control or on the projector.
(The example below shows how to reset the Image menu.) Reset settings for current menu Reset settings for all menus pointer buttons to button to view a sub-screen for pointer Enter button to save your button to exit. , and confirm as needed. Reset Fine-Tuning the Projector...
To restore all the projector settings to their factory-default values, select the note When you select Reset All in the Reset menu, it does not Adjusting the Image reset the Computer Input, Video Signal, User’s Logo, You can use the Image menu to adjust the brightness, sharpness, color, Language, or Lamp settings.
Dynamic Color Mode setting.) Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio to widescreen format for video images.
Page 66
Before adjusting tracking or sync, fill the screen with an image containing fine detail, such as black text on a white background. Fine-Tuning the Projector pointer buttons to highlight the desired option, then adjust it as needed: ■ Auto Setup...
Choose an aspect ratio setting that allows the image to fit best in the display area. See page 34 for details. Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features. ■...
Page 68
This feature is available only when the projector is set for front projection (it is enabled by default). Control Panel Lock Lets you disable the buttons on the projector. See page 73 for more information. Pointer Shape Lets you choose from three alternative pointer shapes.
Lock the network configuration settings. See page 71. ■ If you create a user’s logo for the projector, you can set up the logo so it is displayed as the startup screen and/or A/V Mute screen. Unauthorized users cannot turn it off or change it. This feature is intended to discourage theft and provides a way to identify the projector should it be stolen.
Page 70
. Select and press Enter Enter When this feature is on, the logo appears whenever you turn on the projector (if the Startup Screen menu; see page 72). It also appears when you press the button (if you selected the Logo Display in the Extended menu).
When you see the Password Protect Release screen again, you can try to enter the correct password. If you enter an incorrect password 30 times in succession, the projector remains locked and you must contact Epson to have the projector serviced. Network Protect...
If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance. See “Where To Get Help” on page 102. Creating Your Own Startup Screen note You can transfer any image from your computer or video source to the Once you capture an image, projector and then use it as your startup screen.
Logo Enter. 5. When you’re finished, press Disabling the Projector’s Buttons You can lock all the projector’s control panel buttons, or all buttons except the Ppower button. The projector can still be operated using the remote control. 1. Press the...
Enter button on the projector’s control panel for Customizing Power and Operation 7 seconds. You can use the Extended menu to customize the way the projector displays images, enable quick startup, turn sleep mode on or off, and customize other projector operations. ■...
Page 75
Direct Power On cable is connected (without pressing the to have the projector turn off automatically if it is Sleep Mode idle (and no signal is received) for the amount of time you select...
■ Guide. Refer all other servicing to qualified service personnel. our projector needs little maintenance. All you have to do is keep Cleaning the lens Cleaning the projector case Cleaning the air filter and vent Replacing the lamp and air filter...
To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens. Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power caution cord. Do not use wax, alcohol, ■...
3. If the dirt is difficult to remove or the filter is damaged, or if the message appears again after cleaning, replace the filter as described on page 84. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to purchase a new filter.
2. When the Ppower light stops flashing, unplug the power cord. before replacing it. 3. Let the projector cool for at least an hour (if it has been on). The In the unlikely event that the lamp has broken, small...
Page 81
4. Loosen the lamp cover screw (you can’t remove it). Then slide the lamp cover and lift it off of the projector. 5. Loosen the two screws holding the lamp in place (you can’t remove them). Loosen, but don’t remove these screws...
Page 82
Do not put in the trash. 7. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is 8. Push down the side marked Maintaining the Projector facing the right way.) PUSH until it snaps in.
Page 83
9. Once the lamp is fully inserted, tighten its screws. 10. Replace the lamp cover, then tighten its screw. 11. Reset the lamp timer as described page 86. Maintaining the Projector...
If the filter is difficult to clean or damaged, or if the overheating message appears after cleaning, you need to replace the filter. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to obtain a new filter. 1. Turn off the projector.
Page 85
4. Grasp the tab and pull the filter straight out. 5. Press in the new air filter until it clicks in place. 6. Close the air filter cover. Maintaining the Projector...
5. When you’re finished, press Maintaining the Projector button on the remote control or on the Menu projector’s control panel. You see the main menu. buttons on the remote control (or the arrow buttons on the projector) to highlight Reset...
■ When transporting the projector a long distance, first place it in a hard-shell shipping case, then pack it in a firm box with cushioning around the case. (An optional case is available from Epson;...
Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system What to do when the projector’s status lights flash ■...
Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the Ppower light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector.
Clean them or replace the air filter as described on page 79. If this does not resolve the problem, stop using the projector, disconnect the power cable, and contact Epson as described on page 102. Temperature light power button to turn it on.
Page 92
80. The air filter or vent may be clogged. Clean them or replace the air filter as described on page 79. If this does not resolve the problem, contact Epson as described on page 102. Flashing red Power is cut off because of an internal problem.
The power cable may be defective. Disconnect the cable from the ■ outlet and contact Epson as described on page 102. Check to see if the A/V Mute slide is closed. ■ ■...
You hear the projector’s fan after the power has been turned off. Standby Mode operate after the projector has cooled down. See page 75 for more information about this setting. Solving Problems with the Image or Sound No image appears on the screen.
Page 95
If you’ve connected a computer and one or more video sources, you may need to press the Source Search projector or one of the source buttons on the remote control to select the correct source. Pressing the remote control will toggle between Computer1 and Computer2 inputs.
Page 96
Make sure your computer’s resolution doesn’t exceed UXGA × (1600 1200) and the frequency or refresh rate is supported by the projector (see page 110). If necessary, change your computer’s resolution setting. Press the button on the remote control to select a Aspect different setting (see page 34).
Page 97
If the top or bottom of the image is broader, press the button on the projector until the image is square. If the projector is angled toward the screen from the left or right, ■ the image will be broader on one side. Center the projector in front of the middle of the screen, facing the screen squarely.
Page 98
Solving Problems Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment to a warm environment. Make sure the projector is facing the screen squarely, to eliminate the need for keystone correction.
Page 99
■ Try changing the Brightness Control page 68). ■ Check your computer display settings to correct the color balance. The projector’s lamp may need to be replaced. See page 80 for ■ instructions. In the Image menu, select ■ Reset to their defaults.
■ ■ ■ Solving Network Problems You are not receiving mail when a projector problem occurs. ■ ■ Solving Problems Make sure the audio cable is connected securely at both ends. For computer audio, connect the cable to your computer’s headphone jack or audio out jack.
The remote control’s batteries may not be installed correctly or may be low on power. To change the batteries, see page 30. Make sure you are within about 20 feet (6 meters) of the projector ■ and within range of the projector’s front or back sensor (approximately 30°...
Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.
Purchase Supplies and Accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Solving Problems...
The projector can be installed for four different viewing setups: front projection, ceiling projection, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown:...
Page 106
You can correct the distortion using the projector’s menu system (see page 67). If you place the projector so that the base of the lens is level with the bottom of the screen, the image should be square and you won’t have to adjust it.
Technical Specifications General Type of display Epson poly-silicon TFT active matrix Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 16.8 million colors Light output High Brightness mode: 2600 lumens white light output (ISO 21118 standard) 2600 lumens color light output...
Lamp life results will vary Power consumption depending upon mode selected, environmental Lamp life conditions, and usage. Turn off this product when not in use to prolong the life Part number of the projector. Remote Control Range Batteries Dimensions Height Width Depth Weight...
Page 109
0 to 7,500 ft (0 to 2,286 m) Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950-1 Second Edition Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 ™ Pixelworks ™ ICs are used in this projector. Technical Specifications...
To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector. Some images are automatically resized using Epson’s SizeWise™ technology to display in the projector’s “native” format (XGA or WXGA).
Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage your eyes. ■ Do not place the projector on an unstable cart, stand, or table.
Page 114
Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector. If you are setting up the projector near a wall, leave at least 7.9 inches (20 cm) of...
Page 115
If you are not sure of the power available, consult your dealer or power company. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■...
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VGA-to-component, 47 Capturing image, 72 to 73 Carrying case, 10, 13, 87 Ceiling mount, 13, 105 to 106 Cleaning air filter, 79 lens, 78 projector case, 78 Closed captioning, 74 Color correcting, 35 mode, 35, 64 problems, 99 saturation, 64...
Page 118
Focusing image, 24 Freeze button, 32 HDTV images, video formats, 111 Height of image, adjusting, 24 Help system, using, 90 Help, Epson, 8, 102 to 103 High altitude, 75 Index Image adjusting, 23 to 27, 64 to 65 blurry, 97 to 98...
Page 119
Lights, status, 91 to 92 Logo, saving on projector, 72 to 73 display problems, 95 resolution setting, 96 Manuals, 8 Menus changing settings, 62 to 63 default settings, restoring, 63 to 64 Extended, 74 to 75 Image, 64 to 65...
Page 120
Safety instructions, 113 to 115 specifications, 109 Saturation setting, 64 Screen blank, 21 to 23 distance from projector, 16, 107 ordering, 13 startup screen, creating, 72 to 73 Screen image, See Image Security attaching lock, 11 control panel lock, 73 to 74...
Page 121
21, 95 to 96 projector problems, 89 to 101 remote control problems, 101 Turning off picture (using A/V Mute), 32 Turning on/off projector, 17 to 20 Unpacking projector, 10 button, 42 cable, 10, 41, 42 display, 41 to 42...