Projector Status Lights; Turning Off The Picture And Sound; Freezing The Action; Locking The Projector - Epson PowerLite S4 Product Information

Epson PowerLite S4
To change the aspect ratio,
press the button on
Resize
the remote control.

Turning Off the Picture and Sound

Press the button on the remote control to darken
A/V Mute
your screen and turn off the sound. When you're ready to
resume, press again.
A/V Mute
Note: You can make the blank screen blue, instead of black,
whenever you press the A/V Mute button by selecting it as the
background color in the Extended > Display menu.
You can also temporarily
stop the picture and sound
by closing the lens cover.

Freezing the Action

Press the button on the remote control to temporarily
Freeze
freeze the action on the screen. This freezes any moving images
on the screen until you press the
Like the A/V Mute feature, if you are projecting a video, the
video and audio continue while the projected image is paused.

Locking the Projector

You can lock the projector to prevent the image from being
accidentally changed once it's adjusted, and to keep children
from using the projector without adult supervision.
1. Press the button on the projector or remote control.
Menu
2. Use the menu navigation buttons to open the
menu, then select
Operation Lock
3. Turn the setting on to disable all the buttons on the
projector's control panel, except for the
operate the projector, you have to use the remote control.
4. Press to exit the menu system.
Menu
Note: You can also set a password to prevent unauthorized use of
the projector, or to allow the projector to be used for a selected
period of time before password entry is required. See the User's
Guide for details.
6 - Epson PowerLite S4
Resize
button
button again.
Freeze
Settings
.
button. To
Power

Projector Status Lights

If your projector isn't working correctly, first turn it off, wait for
the warning light to turn a steady orange, and unplug it. Then
plug the power cord back in and turn on the projector. If this
doesn't solve the problem, check the lights on top of the
projector. They alert you to possible problems.
Power light
Lamp light
Temperature light
Light Status
off
P
orange
P
flashing green
P
green
P
flashing
P
orange
flashing
orange
Power light is
P
red and Lamp
light is flashing
red
Power light is
P
flashing red
and Temp
light is flashing
orange
Power and
P
Temp lights
are red
Power light is
red and Temp
light is flashing
red
6/06
Action
Make sure the power cable is connected
securely at both ends.
The projector is in standby mode. You can
unplug the projector or press the P Power
button to turn it on.
The projector is warming up. The projected
image starts to appear after about 4 seconds.
The projector is operating normally.
You've turned off the projector and it's
cooling down. Wait until the light stops
flashing, then unplug it (or press the P Power
button to turn it back on).
The lamp needs to be replaced soon. Make
sure you have a spare lamp handy.
The lamp needs to be replaced for projection
to continue. If you just replaced the lamp,
make sure the lamp cover is securely
attached.
The projector is overheating. Make sure the
air filter is clean; replace it if necessary.
The projector is overheating. The lamp will
turn off automatically and projection will stop.
Make sure the air filter is clean; replace it if
necessary.
There is an internal problem. Turn off the
projector and unplug it. Then contact Epson
for assistance.