Epson ESC/VP21 User Manual page 29

\Q0
\Q1
\Q2
\Q3
\Tn
Set Inactivity Timer
During a normal or reliable connection, if no data is sent or received within the
inactivity time period, the link will be disconnected. The default of zero disables
this feature.
n=0-90
\T0
\U
Accept Auto-reliable Link
in normal mode (\N0), the modem attempts to answer an MNP link request regardless of
whether the modem originated or answered the telephone call (physical connec-
tion). The remote modem must originate the MNP link request for the link to be
established (refer to the '\O' command).
\Vn Modify Result Code Form
This command specifies which modem response codes are supported.
\V0
2 - COMMAND REFERENCE
Disables flow control.
XON/XOFF software flow control.
Unidirectional hardware flow control.
Bidirectional hardware flow controll. (default)
Lenth in minutes.
Disables inactivity timer. (default)
Enables codes defined by ATV
command. (default)
21