Epson ESC/VP21 User Manual page 47

Fax/data modem

Hide thumbs Also See for ESC/VP21:

Table of Contents

Backspace Character

S5 specifies the backspace character that is used to delete the

last-entered character. After receiving a backspace character, the

modem sends three characters to the DTE: a backspace charac-

ter, a space character, and then another backspace character.

Range:

Default: 8 (BS)

Wait Before Blind Dialing

S6 specifies the amount of time after the modem goes off-hook

before the modem starts dialing the first telephone number. The

modem waits for at least 2 seconds, even if S6 is set for a value

less than 2, before dialing the first number. S6 is only used for

result code type commands X0, X1, X3 (i.e., blind dialing result

code types). The 'W' (wait for dial tone) dial modifier causes the

modem to ignore the contents of S6. Result code types X2 and

X4 enable dial-tone detection, but never use S6.

Range: 2-255 seconds

Default: 2 seconds

Wait for Carrier/Dial tone

S7 specifies the amount of time that the modem waits to detect the

0-32, 127

S REGISTER REFERENCE - 3

Table of Contents