About The Ac Adapter; Installing The Battery - Epson P-1000 User Manual

About the AC Adapter

The P-1000 comes with an AC adapter. Use the adapter to
charge the battery and when the P-1000 is connected to a
computer, CD-R/RW drive, or printer. You might also
want to use it whenever possible to view your images, so you
can save battery power.
Warning:
Use only the AC adapter provided, which is designed for the
P-1000. Using another adapter could cause fire, electrical shock,
or injury.
Do not use the AC power cord or the adapter for any purpose
other than powering the P-1000.
If the AC plug does not fit your outlet, have a proper outlet
installed by a qualified electrician.
To avoid radiation danger, do not expose or remove the ferrite
core.
To prevent fire or electric shock, do not cover the AC adapter
with a blanket or similar covering.
Do not connect the AC adapter when the battery is not installed;
this can damage the P-1000.
Do not remove the AC adapter from this device during
operations. You can, however, connect the adapter during
operations.

Installing the Battery

The P-1000 comes with a Lithium-ion battery. Follow these
steps to install it:
1 Slide the battery cover release button as shown below to
unlock the battery cover.
2 Slide the cover off.
Getting Started 12