Conserving Battery Power; Placing The P-1000 In The Viewing Stand - Epson P-1000 User Manual

The light flashes green while the battery is being
CHARGE
charged. When the battery is fully charged, the
light turns off. A fully charged battery lasts about 1 hour,
depending on how you use the P-1000. When it is running
out, you see the message
Battery power is low. Connect
the AC adapter to ensure proper operation

Conserving Battery Power

To conserve battery power and protect the LCD screen, the
P-1000 has two power-saving features. If no button has
been pressed and there has been no activity for 3 minutes,
the backlight on the LCD screen is turned off. After 5
minutes, the power is turned off.
Note:
You can change the number of minutes for these settings; see
"Setting the Power Save Options" on page 48.
If the screen goes dark because the backlight is turned off,
press any button on the P-1000 to resume operation. If the
P-1000 has been powered off, you need to turn it back on
with the power switch.
Note:
The power is also turned off if the P-1000 gets too hot. If this
happens, let it cool before turning it back on.
Placing the P-1000 in the Viewing
CHARGE
Stand
For a comfortable way to look at your pictures, you can put
the P-1000 in the viewing stand:
.
This is especially convenient for watching a slide show.
Getting Started 15