Reducing The After-Image Of Fast-Moving Images (Motion Control); Motion Control - JVC DLA-NX5 Instructions Manual

For users seeking to obtain a gamma curve that is more faithful to the original PQ curve
Our projectors have been adjusted to display the projector images on the screen in the optimal quality in the default
setting based on the original PQ curve. For users who wish to obtain results more faithful to the original PQ curve, please
adjust manually with reference to the values below.
When clipping point is 400 nits
Picture Tone
Dark Level
Bright Level
When clipping point is 1000 nits
Picture Tone
Dark Level
Bright Level
When clipping point is 2000 nits
Picture Tone
Dark Level
Bright Level
When clipping point is 4000 nits
Picture Tone
Dark Level
Bright Level
* This product is designed for home use and we do not provide guarantee for commercial uses such as in mastering
work.

Reducing the After-image of Fast-moving Images (Motion Control)

Low Latency
For changing the low latency setting.
You are recommended to set to "On" for contents requiring short latency such as games.
Press the [MENU] button to display the menu and select "Picture Adjust"""Motion
1
Control"""Low Latency"
Setting
Off
On
* "Clear Motion Drive" cannot be set when "Low Latency" is set to "On".
* Even when "Low Latency" is set to "On", delay will not become zero.
42
+5
0
+7
-7
0
+7
-9
0
+7
-13
0
+7
Does not perform the low latency setting.
Performs the low latency setting.
Description