Auto Tone Mapping; Mapping Level - JVC DLA-NX5 Instructions Manual

List of selectable "Correction Value" according to "Picture Mode"
Picture Mode
Film k l
Cinema
Natural
HDR10
HLG
User 1 to User 6
Gamma
You can adjust the output value of the projected image with respect to the video signal input.
Æ "Adjusting the Output Value of the Projected Image (Gamma)" (P. 36)
Correction Value
For setting the base gamma for the adjustment of "Picture Tone", "Dark Level" and "Bright Level" when one of the
"Custom 1" to "Custom 3" settings is selected in "Gamma".
Æ "Fine-tuning to the Preferred Gamma Setting" (P. 38)

Auto Tone Mapping

Gamma adjustment is performed automatically to achieve the optimal brightness based on the mastering information
(Max CLL/Max FALL) contained in the HDR10 content.
Æ "Set Auto Tone Mapping" (P. 40)

Mapping Level

Configure the base brightness for "Auto Tone Mapping".
Æ "Set Auto Tone Mapping" (P. 40)
Picture Tone
Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image.
Æ "Fine-tuning to the Preferred Gamma Setting" (P. 38)
Æ "Set Auto Tone Mapping" (P. 41)
Dark Level / Bright Level
You can adjust the image quality to produce a sharp contrast in the brightness.
Æ "Fine-tuning to the Preferred Gamma Setting" (P. 38)
Æ "Set Auto Tone Mapping" (P. 41)
Xenon 1 k l
Xenon 2 k l
5500K
6500K
7500K
9300K
Xenon 1 k l
Xenon 2 k l
High Bright
5500K
6500K
7500K
9300K
High Bright
Correction Value
49