DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels
4.7.3
UL and CSA certified
4.8
Compatibility Test
The devices of the VAM 11.1/VAM 41.1 product family are certificated accord‐
ing to
●
UL508 (Industrial Control Equipment) and
●
C22.2 no. 142-M1987 (CSA)
UL file no. E210730
However, there can be combinations or stages of expansions with limited or
missing certification. Therefore verify the certification by using the UL label on
the device.
To guarantee an UL- and CSA-compliant operation, the following
conditions have to be fulfilled:
●
Use only insulated copper wire suitable for at least 60/75 °C.
NOTICE
The UL- and CSA- marking is only valid for the device in its delivery status. After
having modified the device the UL and CSA compliance must be verified.
All Rexroth controls and drives are developed and tested according to the latest
state-of-the-art of technology.
As it is impossible to follow the continuing development of all materials (e. g.
lubricants in machine tools) which may interact with our controls and drives, it
cannot be completely ruled out that any reactions with the materials used by
Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test has to
be carried out for new lubricants, cleaning agents etc. and our housings / our
housing materials.
Bosch Rexroth AG
Loss of UL and CSA compliance due to
changes on the device.
31/83
Technical Data