Setting The Time (Fig. A); Operation; Weighing (Fig. A) - Silvercrest Z30441A Manual

Preparing the product for use / Operation

Setting the time (Fig. A)

After you have inserted the batteries, the scale switches auto-
matically into the time mode
switched into the time mode
the LC display
If the scale is in the weighing mode, press and keep pressed
the MODE button
mode
Press and keep pressed the TARE button
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
hour value flashes.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
Note: If you do not press another button within 20 seconds,
the set value stops to flash and the time is set.

Operation

Weighing (Fig. A)

If the scale is in the time mode
once to switch into the weighing mode.
Note: Shortly before the scale switches into the weighing
mode, the scale shows "HELO" in the display for 1–2 sec-
onds.
1. Place the kitchen scale on a solid, flat surface.
2. Press the MODE button
unit indicator (g / lb'oz).
44 GB/MT
66233_silv_Kuechenwaage_Content_LB5.indd 44
. As soon as the scale has
5
, the minute value flashes in
5
. In this event, skip the next to two steps.
1
for 3 seconds to switch into the time
3
.
5
to set the desired minute value.
3
to confirm your setting. Then the
2
to set the desired hour value.
3
to confirm your setting.
2
5
once to change the weight
3
to set the time.
2
to speed up
3
to speed up
3
, press the MODE button
3
1
2
3
4
5
6
If
6
m
a
3
15.06.11 09:48