Incremental Weighing (Fig. A); Troubleshooting - Silvercrest Z30441A Manual

3. Place the substance to be weighed on the scale. The
weight of the substance being weighed is shown in the
LC display

Incremental weighing (Fig. A)

d 1. Follow steps 1 to 3 of the section on "Weighing" and
e press the TARE button
and the TARE symbol
e. 2. Add another substance to be weighed to the scale. The
e. LC display
p stance.
3. If you remove the added substance from the scale, the
e LC display
4. If you remove all of the substances to be weighed from
the scale, the LC display shows a negative value
p 5. Press the TARE button
ceases to be displayed.
6. Activate the TARE function only within a range of 3–1,000 g.
If there is no substance to be weighed on the scale and if
60 seconds elapses without a button being pressed or no
movement on the scale plate is noted, the scale switches
automatically into the time mode

Troubleshooting

= Fault
g = Cause
c- = Solution
=
= The scale is unstable or not quite plumb.
= Ensure the device is firmly fixed in place and exactly plumb.
66233_silv_Kuechenwaage_Content_LB5.indd 45
Operation / Troubleshooting
.
1
. The LC display
2
appears.
8
shows the weight of the newly added sub-
1
shows 0.
1
once and the TARE symbol
2
.
5
shows 0
1
.
9
8
GB/MT 45
15.06.11 09:48