Sending Data From A Pocket Pc Or Computer - Brother MPRINT MW-100 User Manual

Sending data from a Pocket PC or computer

In order use this printer to print data from a Pocket PC (PDA run-
ning Pocket PC) or computer, the software must first be installed
onto the Pocket PC or computer as described in the 'software
guide' supplied with the printer.
Sending data through an IrDA connection
A Pocket PC can communicate with this printer through its IrDA
infrared port.
1
Position this printer and
the Pocket PC so that
their IrDA infrared ports
are facing each other and
are positioned not more
than 20 cm apart.
2
Start printing from the Pocket PC.
→ While data is being transmitted through the IrDA infra-
red port, the status indicator light flashes in green.
• During transmission, do not move this printer or
• Make sure that there are no obstacles between
• If this printer is connected with a USB cable or if
• IrDA infrared transmission is not possible with
• For more details, refer to the instruction manual
10
the Pocket PC.
this printer and the Pocket PC.
the Pocket PC is connected through a serial con-
nection, the infrared transmission cannot be
used.
computers
for the Pocket PC.