D-Link Air DCF-660W/K Manual page 11

Getting Started
Install the D-Link Air DCF-660W into your PDA
Installation Guide included with the DCF-660W. In all the above
installations, the LEDs will light ON to show connection.
Setting up a Wireless Ad Hoc Network
Install a network adapter into one computer.
above, a D-Link Air DWL-120 USB Wireless Network adapter is
installed.
installed in a desktop computer.
included with the product for installation instructions.
Install a wireless cardbus adapter (such as the DWL-650) into a
laptop computer.
network adapter.
Ad-Hoc mode, set the adapters to the same channel, and assign
an IP Address to each computer on the Ad-Hoc network. (See
box below.)
Install and configure the DCF-660W.
Guide included with the product.
A DWL-520 Wireless PCI Adapter could also be
See the Quick Installation Guide included with the
Set the wireless configuration for the adapters to
. See the Quick
See the Quick Installation Guide
See the Quick Installation
In the example