You can also create encryption keys manually by clicking the Create Keys
Manually check box.
For 64bit encryption you may choose:
Alphanumeric: 5 characters (case sensitive) ranging from "a-z",
"A-Z" and "0-9" (e.g. MyKey)
Hexadecimal: 10 hexadecimal digits in the range of "A-F", "a-f"
and "0-9" (e.g. 11AA22BB33)
For 128bit encryption you may choose:
Alphanumeric: 13 characters (case sensitive) ranging from "a-z",
"A-Z" and "0-9" (e.g. MyKey12345678)
Hexadecimal: 26 hexadecimal digits in the range of "A-F", "a-f"
and "0-9" (e.g. 00112233445566778899AABBCC).
After entering the WEP keys in the key field, select one key as active key,
click the OK button and then click the Apply button on the Configuration
tab to make the setting take effect.