Table of Contents
Advertisement
PRECAUTIONS
General
Please ensure that the equipment is positioned
in a well ventilated area and ensure that there is
at least 4" (10cm) of free space along the sides
and back. There must also be a minimum of 8"
(20cm) of free space on the top of the unit.
Do not use oil, solvents, gasoline, paint thinners
or insecticides on the unit.
Do not expose the unit to moisture, to tempera-
tures higher than 140°F (60°C) or to extreme low
temperatures.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home comput-
ers, facsimiles, etc.) which generate electrical
noise.
Hold the AC power plug by the head when re-
moving it from the AC outlet, since pulling the
cord can damage internal wires.
Do not remove the outer cover, as this may re-
sult in electric shock.
Refer internal service to your local SHARP serv-
ice facility.
Use the unit on a firm, level surface free from
vibration, and do not place anything on the top
of the unit.
If the unit malfunctions while in use, press the
POWER button to enter the stand-by mode, then
disconnect the AC power cord from the AC out-
let. Plug the AC power cord back in, and then
press the POWER button to turn the power on.
If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
cord from the AC outlet for safety.
Warning:
The voltage used must be the same as that speci-
fied on this unit. Using this product with a higher
voltage other than which is specified is dangerous
and may result in a fire or other type of accident
causing damage. SHARP will not be held respon-
sible for any damage resulting from use of this unit
with a voltage other than that which is specified.
Volume control
The sound level at a given volume setting depends
on a combination of speaker efficiency, location and
various other factors.
It is advisable to avoid exposure to high volume
levels, which occur while turning the unit on with
the volume control setting up high, or while con-
tinually listening at high volumes.
Condensation
Sudden temperature changes, storage or opera-
tion in an extremely humid environment may cause
condensation inside the cabinet (CD pickup, MD
pickup, etc.) or on the transmitter LED on the re-
mote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc in
the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmit-
ter LED with a soft cloth before operating the unit.
Warning:
CD players use a laser pickup which can damage
the eyes if viewed directly. Do not look at the pickup,
and do not touch the pickup directly.
4
Advertisement
Table of Contents
