Regular Maintenance; Cleaning The Main Charger Of The Photoconductive Drum - Sharp mx-b380p Operation Manual

REGULAR MAINTENANCE

To ensure that the machine continues to provide top quality performance, periodically clean the machine.
Caution
Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical
components or the fusing unit inside the machine, fire or electrical shock may result.
Do not use thinner, benzene, or similar volatile cleaning agents to clean the machine. These may degrade or discolour the
housing.
CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines appear, use the charger cleaner to clean the main charger.
A replacement main charger cleaner is included with the drum cartridge. When you replace the drum cartridge, replace the
main charger cleaner as well.
1
2
Do not point the holes down as used toner will spill out.
BEFORE USING THE MACHINE
Press the [POWER] key (
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
Open the front cover and remove the
toner collection container.
☞
REPLACING THE TONER COLLECTION
CONTAINER (page 1-52)
1-64
) on the