Sony DCR-TRV940 Service Manual page 218

Changing the default settings with the menu
Icon/item
VCR SET
HiFi SOUND
AUDIO MIX
A/VtDV OUT
LCD/VF SET
LCD B. L.
LCD COLOR
VF B.L.
GUIDEFRAME
Notes on LCD B.L. and VF B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
• When you use power supplies other than the battery pack, BRIGHT is automatically
selected.
Even if you adjust LCD B.L., LCD COLOR and/or VF B.L.
The recorded picture will not be affected.
210
Mode Meaning
z STEREO To play back a stereo tape or dual sound track
tape with main and sub sound (p. 229)
1 To play back a stereo tape with the left sound or
a dual sound tape with main sound
2 To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
—— To adjust the balance between the stereo 1 and
stereo 2 (p. 118)
z OFF To output digital images and sound in analog
format using your camcorder
ON To output analog images and sound in digital
format using your camcorder (p. 204)
z BRT NORMAL To set the brightness on the LCD screen to
normal
BRIGHT To brighten the LCD screen
—— To adjust the color on the LCD screen, turn the
SEL/PUSH EXE dial.
z BRT NORMAL
To set the brightness on the viewfinder screen to
normal
BRIGHT To brighten the viewfinder screen
z OFF Does not display the guide frame.
ON
Displays the guide frame (p. 64).
ST1
To get low-
intensity
POWER
switch
VCR
VCR
ST2
VCR
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
To get high-
intensity
VCR
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK