Other Information - Brother DCP-9055CDN Quick Start Manual

Other Information

Colour Correction (if needed)
Colour Calibration
The output density for each colour may vary
depending on the environment the machine is in,
such as temperature and humidity. Calibration helps
you to improve the colour density.
Note
• If you print using the Direct Print feature or the
BR-Script printer driver, you need to perform
the calibration from the control panel. See
Using the control panel on page 18.
• If you print using the Windows
the driver will get the calibration data
automatically if both Use Calibration Data and
Get Device Data Automatically are on. See
Advanced tab in the Software User's Guide.
• If you print using the Macintosh printer driver,
you need to perform the calibration using
Status Monitor. After turning Status Monitor
on, choose Color Calibration from Control
menu. See Status Monitor in the Software
User's Guide.
Using the control panel
a
Press Menu, 3, 6.
b
Press a or b to choose Calibrate.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
You can reset the calibration parameters back to
those set at the factory.
a
Press Menu, 3, 6.
b
Press a or b to choose Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
18
Colour Registration
Auto Registration
You can adjust the print position of each colour
automatically.
a
b
c
®
printer driver,
Brother CreativeCenter Icon
Get inspired. Double-click the Brother CreativeCenter
icon on your desktop to access a FREE web site with
many ideas and resources for personal and
professional use.
http://www.brother.com/creativecenter/
Press Menu, 3, 7.
Press 1 to choose Start.
Press Stop/Exit.
To adjust the print position of each colour
manually, see Manual Registration in the
Basic User's Guide.