Connect The Power Cord; Choose Your Language - Brother DCP-9055CDN Quick Start Manual

4

Connect the power cord

IMPORTANT
DO NOT connect the interface
cable yet.
a
Connect the AC power cord to the machine,
and then plug it into an electrical socket.
b
Remove the label covering the machine's
power switch, and then switch the machine on.
5

Choose your language

a
After turning the power switch on, the LCD
shows:
Select Language
a English
Français
b Deutsch
Select ab or OK
Press a or b to choose your language and
press OK.
b
The LCD prompts you to confirm your
selection.
Select Language
English
1.Yes
2.No
Enter Number
If the LCD shows the correct language,
press 1.
—OR—
Press 2 to go back to step a to choose the
language again.
Note
If you have set the wrong language, you can
change the language from the control panel menu
of the machine. (Menu, 1, 0)
5