Advertisement
(2) Remove Signal PWB
Disconnect
ESC1(PH-3P), ESC2(PH-7P),
ESS(EH4P-HR3P/HR2P),
ESD3(EH-12P), ESD2(FFC-40P) ,
PSD1(FFC-40P)
PST ,ESV3,EVC2, EVC1
connectors.
Be careful not to be damaged the
PSV1-3 Connector holder.
Remove 2 screws(c), 8screws(f),
plastic rivet, 4screws(e) 2screws(g)
and remove Signal PWB,and
Video PWB.
(3) Remove filter PWB
Disconnect P902A, PESW1 connector.
Remove 4screws(d) and remove
the filter cover.
Then remove 4screws(g),
and remove Filter PWB.
Ｓｃｒｅｗ（ｃ）
Screw(c)
Ｐｌａｓｔｉｃ ｒｉｖｅｔ
Plastic rivet
Ｆｉｌｔｅｒ
Filter Cover
Ｃｏｖｅｒ
Screw (g)
Ｓｃｒｅｗ（ｇ）
8
ＳＩＧＮＡＬ
ＶＩＤＥＯ
ＰＷＢ
ＰＷＢ
Ｓｃｒｅｗ（ｆ）
Ｓｃｒｅｗ（ｆ）
Screw (f)
Screw (f)
Ｓｃｒｅｗ（ｇ）
Screw (g)
Ｓｃｒｅｗ（ｅ）
Screw (e)
Ｓｃｒｅｗ（ｅ）
Screw (e)
Ｓｃｒｅｗ（ｄ）
Screw (d)
Screw(c)
Ｓｃｒｅｗ（
Advertisement
