Hitachi CMP307XE Service Manual page 9

(4) Remove Front Frame
Remove 3 screws(l),then be
careful not to be damaged the
face of front filter.
Attached the Stand with 4screw(a),
then stand it vertically.
When remove front frame.
(5) Remove Front Filter(Glass)
Remove 22 screws(m), and remove
Filter hold Metal and Front Filter.
Be careful not to fall down the front
Filter. When remove the filter hold
Metal. When attach the new Front
Filter, remove protection film on a
side(yellow tag is marked).Then
attach to the Front Frame, locating the
conducting electrode side to the inside,
and attach Filter hold Metal.
Screw(m)
Ｓｃｒｅｗ（ｍ）
Screw(m)
Ｓｃｒｅｗ（ｍ）
Front Filter (Glass)
Ｓｃｒｅｗ（ｍ）
Screw(m)
9
Ｓｃｒｅｗ（ｌ）
Screw (ｌ)
Ｓｃｒｅｗ（ａ）
Screw (ａ)
Filter holder
Screw(m)
Ｍａｉｎ ｆｒａｍｅ Ｓｃｒｅｗ（ｍ）
metal
Ｆｒｏｎｔ Ｆｉｌｔｅｒ（Ｇｌａｓｓ）
Ｆｒｏｎｔ Ｆｒａｍｅ
Front Frame
Screw(m)
Ｓｃｒｅｗ（ｍ）
Screw(m)
Ｓｃｒｅｗ（ｍ）