Picture Adjustments - Panasonic TH-42LFE7W Operating Instructions Manual

Picture Adjustments

1
2
Select to adjust each item.
Picture
Normalise Normal
Normal
Picture Mode
100
Backlight
70
Contrast
50
Brightness
50
Colour
Sharpness 50
White balance Normal
Advanced settings
FRAME CREATION
Press to enter Advanced
Settings.
Advanced settings
Enables ne picture adjustment at a professional level
(see next page).
Advanced settings
Normalise Normal
Input level
Gamma
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
24 24
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu
changes depending on signal, input and menu setting.
Max
0
2.2
50
50
50
50
50
50
/ Normalization)
Normalise
Press the left or right button to switch between modes.
Normal*
Normal
For viewing in standard environments.
Dynamic
For viewing in brighter environments.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Note:
If you would like to change the picture and colour of the
selected Picture menu to something else, adjust using the
items in the Picture menu. (see next page)
Press the left or right button to switch between modes.
Normal
FRAME CREATION
Improves motion picture quality by reducing motion blur.
Press the left or right button to switch between modes.
Off Min
Notes:
• The mode is memorized per input terminal.
• Even if "Normalise" is selected, the Normal setting will
not be restored.
• The picture and menu will disappear for a moment
if you switch the mode to Off, or switch from Off to
another mode.
• "FRAME CREATION" is not available for 42-inch models.
Dynamic
Cinema
Warm Cool
Mid Max