Input Search - Panasonic TH-42LFE7W Operating Instructions Manual

Item
Set the functions that operates when
Signal: The "SIGNAL" menu is displayed.
Screensaver: The "SCREENSAVER" menu is displayed.
ECO menu: The "ECO MODE SETTINGS" menu is displayed.
Set up TIMER: The "Set up TIMER" menu is displayed.
Note:
Factory settings are as follows.
FUNCTION1 button: Signal
FUNCTION2 button: Screensaver
Function button assign 1
Use the FUNCTION button
Function button assign 2
Normalisation
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or
"Remote ID" adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
"Shipping" menu is displayed and the lock is released when it disappears.

Input Search

When a signal is not detected, another input with a signal is automatically selected.
Options
Input Search
On
On screen display
Initial input Off
Input Search
Off: When there is no signal, the input is not switched automatically.
All Inputs: Searches all inputs and switches to an input with a signal.
Priority: Searches "Primary Input" and "Secondary Input" in order and switches to an input with a signal.
Searching...
"Searching..." is displayed during the input search.
Primary Input, Secondary Input
Set the input to search when "Priority" is selected.
(NONE) PC DVI
Note:
This menu is available only when "Input lock" is "Off". (see page 43)
The menu screen is displayed. (Example: Signal)
Signal
Cinema reality
HDMI Range
H-Freq.
V-Freq.
Dot Clock Freq.
Signal Format 1280×1024/60
Press the FUNCTION button to exit from the menu.
button on the remote control and hold for more than 5 seconds. The
1/3
Press ACTION ( ) button
HDMI1 HDMI2
Adjustments
is pressed.
[ Digital ]
Off
Auto
63.98 kHz
60.02 Hz
108.0 MHz
Input Search
Input Search
Primary Input
Secondary Input
Options Adjustments
Off
select
1
adjust
2
45 45