Color System; 3:2 Pulldown; Xga Mode - Panasonic TH-42PH20U Operating Instructions Manual

COLOR SYSTEM

Select SIGNAL from the "SET UP" menu during Video (S Video) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
COLOR SYSTEM: Set the color system to match the input signal. When "AUTO" is set, COLOR SYSTEM will be automatically
selected from NTSC/PAL/SECAM/M.NTSC.
To display PAL60 signal, select "AUTO" or "PAL".

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during "VIDEO (S VIDEO)" input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during "COMPONENT" input signal.

XGA MODE

This menu is displayed when the input signal is analog (Component/PC).
This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Note:
After making this setting, be sure to make each adjustment (such as "AUTO SETUP") on the "POS. /SIZE" menu as
necessary. (see page 23)
Press to select the "COLOR SYSTEM" .
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy
input signals the image may in rare cases become unstable. Should
this occur, set the system to match the format of the input signal.
AUTO
Press to select "3:2 PULLDOWN".
Press to set ON/OFF.
Press to select "XGA MODE".
Press to select "AUTO", "1024×768", "1280×768", "1366×768".
AUTO: Automatically selected from 1024×768/1280×768/1366×768.
Switch the setting to suit the input signal for better display depends on the angle of view
or display resolution condition.
PAL SECAM
SET UP for Input Signals
SIGNAL
3D Y/C FILTER (NTSC)
COLOR SYSTEM
3 : 2 PULLDOWN
M.NTSC NTSC
3 : 2 PULLDOWN
XGA MODE
[ VIDEO ]
ON
AUTO
OFF
OFF
AUTO
41